Reply
 
Thread Tools Display Modes
Old 04-21-2006, 07:44 PM   #1 (permalink)
jgangsta
wÇKÊÐ'§ G.âÐMÎñ - §MÃRTmÖdZ 2ÑÐ bô$$ - Ñôôb$ ×TRëMÊ g.
 
jgangsta's Avatar
 
Join Date: Dec 2004
Location: ny
Posts: 2,290
Rep Power: 14 jgangsta is a splendid one to beholdjgangsta is a splendid one to beholdjgangsta is a splendid one to beholdjgangsta is a splendid one to beholdjgangsta is a splendid one to beholdjgangsta is a splendid one to beholdjgangsta is a splendid one to behold
Send a message via AIM to jgangsta
How to create AAC ringers for your MultiMedia Phone
sp thx to spuser.com 4 this

Samsung MM940
Samsung MM900
Samsung MM920
Samsung MM880
Samsung MM800
Samsung MM700
Sanyo MM8300
Sanyo MM7500
Sanyo MM7400
Sanyo MM5600
Sanyo 9000
LG MM535

I am going to list 2 ways to create AAC ringers, depending on what software you have installed on your machine.

Option 1
If you have Quicktime Pro installed, you can make them very easily. All you need are 2 programs, Quicktime Pro, and Mp3Trim. You can download mp3Trim from http://www.mptrim.com/mpTrim.zip.

To create your own AAC files, first open any MP3 which you want to make as a ringer in the mp3Trim program, and use the "How much do you want to trim" section to pick which part of the file you want to make as a ringer. Use the Frame tab if you want to start the ringer at an exact moment. Now, where it says "From the end", make sure to use the UP arrow when you find the end of the ringer, and not press the down by mistake. It will reset the starting time if you do. On the same section, there is a little timer which shows how long the file will be. Keep in mind that the ringer should be about 30 seconds, because after that, it will goto voicemail.

Once you have picked out the part you would like as your ringer, click on "Save As" and save the file on your desktop. This program also has a volume control so if you find your files are too low, you can make it louder. Now, there is also a fade option so you can fade out the end of the ringer just in case.

Once you have the file saved on your desktop, open up Quicktime Pro, and goto File -> Export. In the drop down option titled "Export:", make sure you select Movie to MPEG-4, and click on Options....Once you do that, under the dropdown, select Audio, and make sure Audio Track is set as "Music", and and set the slider for the kbits/second to 24. Under channel, set it to "Mono", and Output Sample Rate to 22.050kHz. Now, set the Encoding Quality to "Best". Click on OK, and click on Save. This will save your file on your desktop.

Now, you have a (filename).mp4 file. Make sure to remove all the spaces in the file name, and rename the extention from mp4 to m4a. If you can not see the extentions, you need to enable that in your windows folder options.

You now have an AAC-endcoded file, and can upload it by using various AAC uploaders.

Option 2
For the people who can't afford Quicktime Pro, here is how to do it for free. You will need dBpowerAMP, which is found here: http://www.dbpoweramp.com/dmc.htm, the Psytel Encoder, which is your AAC/MP4 codec,found here:http://www.dbpoweramp.com/codecs/dBp...-codec-mp4.exe and the mp3Trim program.

Now, once you have everything installed, open any MP3 which you want to make as a ringer in the mp3Trim program, and use the "How much do you want to trim" section to pick which part of the file you want to make as a ringer. Use the Frame tab if you want to start the ringer at an exact moment. Now, where it says "From the end", make sure to use the UP arrow when you find the end of the ringer, and not press the down by mistake. It will reset the starting time if you do. On the same section, there is a little timer which shows how long the file will be. Keep in mind that the ringer should be about 30 seconds, because after that, it will goto voicemail.

Once you have picked out the part you would like as your ringer, click on "Save As" and save the file on your desktop. This program also has a volume control so if you find your files are too low, you can make it louder. Now, there is also a fade option so you can fade out the end of the ringer just in case.

This leaves you with a mp3 file, which is the ringer you want to make. Now, open the dBpowerAMP program, and select the file which you want to convert. In our case, its the file we saved on the desktop.

When the convertor settings options come up, make sure to select "mp4 (CLI)" from the dropdown for format, and select Quality as "48kbits/". Select the Volume normalize option, and click on "Convert >>"

Once the conversion is done, you are left with the mp4 file in the same folder as your original mp3. Rename the file so it doesnt have spaces and has an m4a extension, and you are ready to send the ringer to your phone.
__________________

yea ikno yall like my gfx-yes im nasty **Dont Leech** {G}DoNe|.


Last edited by jgangsta : 04-21-2006 at 08:08 PM.
jgangsta is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT -7. The time now is 11:55 PM.


Powered by vBulletin® Version 3.6.7
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
iDen is a Registered Trademark of Motorola Inc.
WckediDen.com is Not Affiliated with Motorola Inc. or Sprint/Nextel in any way.
Views expressed within Lowandloud.com are those of the Public.